Everything intake and fuel related is listed here.
| Image |
Name |
Price |
|
 (WinCE).jpg "56mm Throttle Body") |
56mm Throttle Body
The stock 3100 Throttle body is 52mm. Stock 3400 s 56mm. While this seems like a small difference, it will equal a very noticable difference once installed on a 3100 engine. Sold as a bare throttle body with plate, so you will need to swap your stock sensors to the new throttle bod… |
$44.99
|
|
 (WinCE).jpg "3500 Plenum TB Adapter") |
3500 Plenum TB Adapter
This adapter converts the 4 bolt 3500 throttle body setup to the standard 3100/3400 2 bolt pattern. Can be used without the O ring and with a paper gasket instead if you wish to use a 52 or 56mm stock unit with a 3500.
… |
$54.99
|
|
 (WinCE).jpg "LX5 65mm TB Adapter") |
LX5 65mm TB Adapter
More are being made and we should have them by Oct 15th if not sooner.
While not as simple to use as our billet option, We have designed an adapter to use the 65mm TB found on the Oldsmobile 3.5 DOHC. Bolting it to the manifold (3100, 3400 or 3500, both bolt patterns and sets of bolts are in… |
$49.99
|
|
 (WinCE).jpg "Upper Intake Install Kit") |
Upper Intake Install Kit
This is the gasket kit you need if you do not want or need to pull the lower intake manifold off the engine. Includes upper intake gaskets, throttle body gasket, and EGR gasket. Please put the year of your vehicle/engine so that the right EGR gasket is sent.OUT OF STOCK |
$19.99
|
|
.jpg "1996-2005 3400 and 2000+ 3100 Intake Manifold Gasket Set") |
1996-2005 3400 and 2000+ 3100 Intake Manifold Gasket Set
For 1996-2005 3400 and 2000+ 3100 engines only.
Everything you need for installing our ported manifolds, or upgrading the factory lower intake manifold gaskets. Factory came with plastic gaskets, that are prone to leaking. We only use the 3rd revision full metal lower intake gasket… |
$79.99
|
|
 (WinCE).jpg "1994-1999 3100 Intake Manifold Gasket Set") |
1994-1999 3100 Intake Manifold Gasket Set
For 94-99 3100 Only Vin M. TB gasket not pictured but is included.
If you are installing large port manifolds onto your small port engine and cylinder heads, please select the large port manifold option to get the correct upper intake gaskets. |
$89.99
|
|
 (WinCE).jpg "94-99 3100 Large Port Intake Upgrade Gasket Set") |
94-99 3100 Large Port Intake Upgrade Gasket Set
These are the same metal gaskets as the 93-99 3100 small port gasket set, but with the large port upper gaskets instead. If you need the 2000 and newer EGR style, please post a note in the additional information section.
ATTENTION! This set does not include new lower intake bolts … |
$99.99
|
|
 |
L67 Injector Rail Brackets
Using L67 injectors in your gen 3 60V6? These stainless rail brackets adjust for the height difference. The second picture shows the difference between these brackets (top) and the stock bracket (bottom).
You cannot bolt a 3800 fuel rail to a 60V6 and these brackets will not help you.… |
$37.99
|
|
.JPG "Innovate LC-1 Standalone Wideband Controller") |
Innovate LC-1 Standalone Wideband Controller
The LC-1 includes the sensor, cable, deep bung with plug, wiring for ground/calibration and logworks software to record through a serial port.
You can check out the installation directions here.
The LC-1 Lambda cable is a complete wideband controller built in to a sealed cable. It features … |
$179.99
|
|
 |
3100 / 3400 Adjustable Fuel Pressure Regulator
TCE adjustable fuel pressure regulator. Comes fully assembled with a brand new regulator base. |
$134.99
|
|
.JPG "1994-1999 3100 Injectors") |
1994-1999 3100 Injectors
These are used 1994-1999 3100 injectors that have been cleaned, spray tested, and ohm checked. |
$99.99
|
|
.JPG "94-95 3.4 DOHC Injectors") |
94-95 3.4 DOHC Injectors
These are used 1994-1995 Green and Yellow band injectors that have been cleaned, spray tested, and ohm checked. |
$99.99
|
|
.JPG "2000-2005 3400 Injectors") |
2000-2005 3400 Injectors
These are used 00-05 injectors that have been cleaned, spray tested, and ohm checked. |
$99.99
|
|
.JPG "28# Injectors") |
28# Injectors
These are used injectors that are rated at 24.7# @ 43.5 PSI, 28.5# @ 55psi, They are a drop in for the 2000 and newer 3100 and 3400 engines, or require different connectors for 1999 and older multec 1 style injectors. These connectors are available for cut/splice installation.
… |
$119.99
|
|
 |
36# L67 Injectors
Set of 6 used Bosch injectors that have been cleaned and tested for a proper spray pattern. Commonly called 36# injectors, these are measured at 352cc/min, or 33.5 # at 3 bar. These use the same connector as 1999 and older 60V6 motors. 2000+ multec 2 will need to change the connect… |
$129.99
|
|
.JPG "00+ Injector Connectors") |
00+ Injector Connectors
2000 and newer Multec 2 injector connectors (6) for injector swaps. These connectors are used but in excellent condition.
… |
$19.99
|
|
.JPG "AN-6 fittings for 3X00 fuel rails") |
AN-6 fittings for 3X00 fuel rails
These AN-6 male end fittings are made from aluminum and then polished. These fittings will allow you to use a remote FPR and braided hoses. Price is for the fittings only, no hoses or fuel pressure regulator.
These pictures are of the now discontinued stainless vers… |
$39.99
|
|
 (WinCE).jpg "3500 Swap FPR Bracket") |
3500 Swap FPR Bracket
When doing the 3500 top end swap, or a complete 3500 swap into an older vehicle, the 3x00 fuel rail can be used with this bracket to keep your stock fuel system. The 3500 fuel rail is a returnless setup, unlike the older systems that use a return line. Swapping the gen 3 rail causes th… |
$34.99
|
|
>Intake/Fuel
Your basket is empty.
